Post Treatment: Process Maintenance and Paint Removal
Atlantic Specialty Chemicals Corporation has developed a wide range of post-treatment and process maintenance formulations. Products range from paint and coating removers, degreasers, paint detach, and corrosion removers formulated for specific metals and other surfaces.
Detack ALK4
Atlantic Detack ALK4 is a proprietary blend of inorganic builders and bacteriastatic agents used to control the alkalinity level in industrial paint booths. Atlantic Detack ALK4 helps to activate the organic polymer system in order to effect a high degree of rapid paint detackification. Atlantic Detack ALK4 offers simplified treatment and increased operator safety over traditional caustic based treatment products. Atlantic Detack ALK4 contains built in corrosion inhibitors to minimize corrosion both below the water line.
Detack PK11
Excellent completely organic paint detackifier. Formulated to detackify and disperse every paint and coating without excessive sludge formation.
Detack PK12
Atlantic Detack PK12 is a metal-free, liquid cationic polymer used to detack paint particles trapped in recirculating water and mask wash systems. It is a unique all-organic material that will prevent paint particle build-up within the paint spray booth water system. Atlantic Detack PK12 is designed for use in all types of water curtain paint spray booth systems. It performs well under various operating conditions such as water quality variations, spray booth design configurations, types of paints and thinners sprayed, and operating temperatures.
Atlantic Detack ALK4-C
Liquid pH and alkalinity adjuster. Maintains paint booth water at 600-2000ppm alkalinity. Formulated for large volume paint booths.
Atlantic Detack PK20
Powdered detackifier and flocculant for 100% water-based paints and stains. Can be used as an aide to removing water-based paint in combination with Atlantic Detack PK12, or as a stand-alone detackifier.Enhances the effectiveness of cyclonic and DAF paint removal systems.
Atlantic Defoam 597D
Atlantic Defoam 597D is a 100% active defoamer which provides efficient defoaming with permanent effect in most applications. Atlantic Defoam 597D is based on highly complex organic defoaming agents that destroy foam on both the systems surface and solution; it is not based on silicone oil. Atlantic Defoam 597D is especially effective on detergent/soap produced and sustained foam in non-heated and lightly-heated spray systems. Atlantic Defoam 597D contains no petroleum hydrocarbons , solvents, or VOC’s and will not stain aluminum, yellow, and ferrous metals. Atlantic Defoam 597D finds application in controlling foam in many areas including, industrial spray washers, cooling towers, paper mill applications, effluent foam control, and paint booth treatments. Atlantic Defoam 597D, being a stable liquid, is highly suited for automatic chemical dispensing where applicable. Atlantic Defoam 597D is highly effective and economical by eliminating the need to slug-feed defoamer.
Atlantic Defoam 6050
Atlantic Defoam 6050 is a 100% active defoamer which provides efficient defoaming with permanent effect in most applications. Atlantic Defoam 6050 is based on highly complex organic defoaming agents that destroy foam on both the systems surface and solution. Atlantic Defoam 6050 is especially effective on detergent/soap produced and sustained foam in non-heated and lightly-heated spray systems and paint booths. Atlantic Defoam 6050 contains no petroleum hydrocarbons , solvents, or VOC’s and will not stain aluminum, yellow, and ferrous metals.
Atlantic Defoam 596
Oil-based surface active defoamer for paint booths and industrial washers.
Atlantic Floc PK30
Concentrated, organic, high molecular weight, moderately cationic liquid polyelectrolyte paint flocculant.
Atlantic Floc PK40
Organic and inorganic blended polymer specifically formulated for flocculation and removal of water based paints.
Atlantic Floc CF52
Cationic emulsion flocculant designed to agglomerate paint and float (or sink) the solids.
Atlantic Floc AN63
Anionic emulsion flocculant designed to agglomerate paint and float (or sink) the solids.
Atlantic KOTE 1285
Atlantic KOTE 1285 is a water-based, near-VOC-free booth coating that protects booth surfaces from paint overspray. In addition, Atlantic KOTE 1285 traps both overspray and other potential contamination (dirt/dust/insects) on booth walls, grates, doors, windows, keeping it out of your paint work. Atlantic KOTE 1285 is fast and easy to apply to all booth surfaces and washes off easily with pressurized water. Atlantic KOTE 1285 is ideal for new or recently repainted booths where the walls and doors are already white and provide good lighting conditions.
Atlantic Kote WB
Water-based latex peelable paint booth coating.
Atlantic Kote 595
Atlantic Kote 595 is a highly concentrated liquid mask wash compound containing film forming agents and water conditioners. Atlantic Kote 595 is designed for applying in industrial recirculating and/or brush coat operations. Atlantic Kote 595 provides a barrier on a clean racking system that allows paint and coatings to temporarily adhere to the coating, while facilitating easy coating removal in subsequent washing operations. Atlantic Kote 595 is chemically very mild and will not attack rack solder areas. After Atlantic Kote 595 is air or heated air dried, it will not run or burn in paint or vacuum metalizing ovens (up to 700°F. Atlantic Kote 595’s liquid form offers excellent employee safety and convenience during tank additions and is completely non-hazardous (as reported on the material safety data sheet).
BioGuard 313NC
Premium Anti-Bacterial Hand Lotion Soap
BioGuard 313C Anti-Bacterial Hand and Body Wash is a unique blend of select mild natural and synthetic high foaming cleaners combined with skin emollients and aloe vera. BioGuard 313NC has a high level, 1% PCMX, and 5% isopropyl alcohol, of a proven germ fighting bactericide combination which provides a thorough cleansing action with mildness. BioGuard 313NC is pH balanced to skin levels. Laboratory tests show 99.75% germ kill* after just 30-seconds of contact. BioGuard 313NC, being an anti-bacterial formula, is highly suited for use in hospitals, restaurants, day care, nursing homes, etc. * Anti-Bacterial tests used standard strains of Staphylococcus aureus, Pseudomonas aeruginosa, and Salmonella typhimurium cultures.
Atlantic Bath+Body
Premium high quality shower, bath, and body soap. PCMX added for germ and odor control.
Atlantic Lotion Soap
High viscosity hand cleaner with natural soaps and skin conditioners. Proven to reduce the occurrence of dermatitis due to frequent hand washing.
Atlantic Powderlite
High quality USDA approved granulated soap. Biodegradable formula with vegetable scrubbers.
Atlantic Borax PLUS
Unique powdered borax hand cleaner. Tough but mild product blended with added natural soaps.
Atlantic Tuff-Kleen
Heavy-duty waterless lotion cleaner. Gently removes the toughest paints, greases, and inks.
Atlantic Soft-Kleen
Mild synthetic health care and office soap. Contains emollients and is anti-microbial.
Atlantic Defoam 2341
Atlantic Defoam 2341 is a mineral oil based foam control agent designed to deliver effective control of foam problems at an efficient level. The product will work very well in most aqueous systems. The product works particularly well in systems where polymer content is based upon styrenated acrylics and/or latex. Extreme pH and/or salinity have relatively little effect on product efficiency.
Atlantic Defoam 597D
Atlantic Defoam 597D is 100% active, non-silicone oil defoamer which provides efficient defoaming with permanent effect in most applications. Atlantic Defoam 597D is based on highly complex organic defoaming agents that destroy foam on both the systems surface and solution. Atlantic Defoam 597D is especially effective on detergent/soap produced and sustained foam in non-heated systems. Atlantic Defoam 597D contains no petroleum, solvents, or VOC’s.
Atlantic Defoam 5838
Atlantic Defoam 5838 is a 60% active organo-silicone designed for use in high-end applications where compatibility and foam control is critical. Atlantic Defoam 5838 works well in most flexo and gravure systems where a high degree of foam control, antifoam persistence and control of microfoam is desired. Atlantic Defoam 5838 is specifically formulated to combat entrained air and foam found in grinding pigments.
Atlantic Defoam 596
Atlantic Defoam 596 is a completely silicone-free defoamer which is 100% active by weight. It provides efficient defoaming with permanent effect in most applications. Atlantic Defoam 596 is based on a highly complex organic defoaming agent that will not interfere with conventional paint processes. Atlantic Defoam 596 was specifically developed for high pressure spray applications where typical defoamers tend to shear and quickly lose effectiveness.
Atlantic Defoam 4050-C
Atlantic Defoam 4050-C is a 100% active liquid defoamer. The product is designed for use in trade sales, industrial acrylic, epoxy and water-based systems. With low-use levels and excellent persistence, Atlantic Defoam 4050-C can be added directly to the letdown and does not require high shear dispersion.
Atlantic Defoam 5835
Atlantic Defoam 5835 is a 60% active organo-silicone designed for use in high-end applications where compatibility and foam control is critical. Atlantic Defoam 5835 works well in most flexo and gravure systems where a high degree of foam control, antifoam persistence and control of microfoam is desired. Atlantic Defoam 5835 is specifically formulated to combat entrained air and foam found in grinding pigments.
Atlantic Defoam 2351
Atlantic Defoam 2351 is synergistic blend of mineral oil and synthetic technology enhanced with surfactants designed to provide the end-user with a highly efficient defoamer. The product is very efficient at controlling foam in those systems where the presence of foam interferes with processing. Developed for those applications where “proteinaceous” foam is especially difficult to control.
Atlantic Defoam 4200
Atlantic Defoam 4200 is a completely silicone-free defoamer which is 100% active by weight. Atlantic Defoam 4200 is a fortified mineral oil foam control agent designed to deliver effective control of foam problems at an efficient cost. The product works very well to control foam in most trade sales applications, both in the grind and the letdown. Atlantic Defoam 4200 also has some application in coatings and adhesives.
Atlantic Defoam 4000
Atlantic Defoam 4000 is a mineral oil-based foam control agent designed to deliver effective control of foam. The product will work very well in most paint and coating systems. The product works particularly well in systems where resin content is based upon acrylics. Atlantic Defoam 4000 also works very well as a grind defoamer.
Atlantic Defoam 4100
Atlantic Defoam 4100 is a mineral oil-based foam control agent designed to deliver effective control of foam problems at an efficient level. The product works very well as general purpose foam control agent in Construction, Coatings, Adhesives and a variety of other media. Suppressor Atlantic Defoam 4100 was designed to be a package stable defoamer/antifoam. Atlantic Defoam 4100 is a completely silicone-free defoamer which is 100% active by weight.
Atlantic Defoam 5000
Atlantic Defoam 5000 is a modified silicone compound that is useful in difficult systems where persistent foam cannot be resolved with ordinary foam control agents. The product is very useful to control foam in UV/EB curable systems where quick dissipation of entrained air is required to produce the desired product. Atlantic Defoam 5000 eliminates unwanted air entrainment, as well as micro- and macro-foam without adverse effects such as pinholes and craters. The product works well where surface defects are problematic.
Atlantic Defoam 5100
Atlantic Defoam 5100 is a low molecular weight silicone defoaming compound. The product is very useful to control foam in UV-EB curable systems where quick dissipation of entrained air is required to produce the desired product. Atlantic Defoam 5100 eliminates unwanted air entrainment, as well as micro- and macro-foam without adverse effects such as pinholes and craters. 20F Replacement.
Atlantic Defoam 5815
Atlantic Defoam 5815 is a 25% active organo-silicone emulsion designed for use in general applications where compatibility and foam control is critical. Atlantic Defoam 5835 works well in most flexo and gravure systems where a high degree of foam control, antifoam persistence and control of microfoam (at an economical price) is desired. Atlantic Defoam 5835 is specifically formulated to combat entrained air found in grinding pigments.
Atlantic Kleen MC-81: General Purpose Sump Cleaner
Atlantic Kleen MC-81 is formulated as an excellent cleaner and emulsifier for greasy, oily soils on any hard surfaces not affected by water. Atlantic Kleen MC-81 is effective in both hard and soft waters, is completely free rinsing, and is chelant-free for strict environmental compliance. Atlantic Kleen MC-81 contains added ingredients to assist in removing oxidized oils, greases, and paraffin waxes for easy rinsing. Atlantic Kleen MC-81 is excellent for cleaning and purging soluble oil coolant sumps and the central system due to its high levels of internal preservatives and hydrocarbon emulsifiers. Atlantic Kleen MC-81 is easily waste-treated with simple alum / hydroxide / flocculant chemistries.
Atlantic Kleen MC66: Machine and Equipment Detergent
Atlantic Kleen MC66 is formulated as an excellent cleaner and temporary emulsifier for greasy, oily, and waxy soils encountered inside industrial washers and coolant sumps after extended production runs and/or scheduled dump cycles. Atlantic Kleen MC66 is effective in both hard and soft waters, is completely free rinsing, and is chelant-free for strict environmental compliance. Atlantic Kleen MC66 contains a touch of added citrus oil and potash to lift and disperse oxidized oils, greases, and paraffin based lubricants and rust inhibitors for easy rinsing. Atlantic Kleen MC66 is formulated with an organic surfactant-based polymer that allows the product to be both an excellent cleaner and highly waste treatable. Atlantic Kleen MC66 contains a unique rinse agent that will indicate alkaline chemical residue with a pH above 8.2. Rinsing until clear will guarantee complete cleaner removal.
Atlantic Kleen 069: Heavy-Duty Pre-Cleaner and Solvent Replacement
Atlantic Kleen 069 is based on the new non-toxic citric solvent derived from orange peelings. Atlantic Kleen 069 exhibits very unique cleaning properties over 100% D’Limonene in a variety of operations ranging from metal finishing, adhesive removal, ink removal, cosmoline and grease removal, and buffing compound removal. Atlantic Kleen 069 exhibits excellent solvency and soil penetration properties when compared to conventional cleaners. Atlantic Kleen 069 may be used in spray washers, steam cleaning, vibratory cleaning, hand wipe applications, or tank immersion cleaning. Atlantic Kleen 069 has a pleasant non-objectionable citrus odor. Atlantic Kleen 069 is all metal safe and has replaced straight solvent with increased employee safety and improved performance. After use, Atlantic Kleen 069 will mix readily into further process cleaners without concern for foam or adverse reaction, and will actually boost the alkaline cleaners performance.
Atlantic Kleen A186: Washer and Coolant Sump Cleaner
Atlantic Kleen A186 is formulated as an excellent cleaner and temporary emulsifier for greasy, oily, and waxy soils encountered inside industrial washers and coolant sumps. Atlantic Kleen A186 is effective in both hard and soft waters, is completely free rinsing, and is chelant-free for strict environmental compliance. Atlantic Kleen A186 contains a touch of added citrus oil and potash to lift and disperse oxidized oils, greases, and paraffin based lubricants and rust inhibitors for easy rinsing. Atlantic Kleen A186 is formulated with an organic surfactant-based polymer that allows the product to be both an excellent cleaner and highly waste treatable.
Atlantic Kleen Green: Mild-Alkaline General Purpose Cleaner
Atlantic Kleen Green is water-clear, mild detergent designed primarily for hard surface cleaning in almost every type of industry ranging from metal working shops to commercial food facilities. Atlantic Kleen Green may be applied manually, non-recirculating high pressure spray, foam generation, or by agitated immersion. Atlantic Kleen Green is a concentrated liquid which is effective in the hardest of waters. Atlantic Kleen Green may be used on steel, stainless steel, aluminum, copper, brass, wood, asphalt, tile, and most plastics. Atlantic Kleen Green’s concentrated detergency emulsifies, saponifies, and effectively disperses even the most difficult oils and soils, and is easily rinsed away. Atlantic Kleen Green leaves an invisible film which provides indoor corrosion protection for up to 30 days on metal components stored indoors.
Atlantic Kleen Citrus: Concentrated Liquid Citrus Detergent / Degreaser
Atlantic Kleen Citrus is a concentrated liquid cleaner and degreaser. Atlantic Kleen Citrus is a blend of safe solvents, emulsifiers, and surfactants to emulsify and disperse hard-to-remove soils based on wax, grease(s), tar, oils, asphalt, and high melting point petroleum by-products. Atlantic Kleen Citrus does not contain any chlorinated solvents and is biodegradable.
As an additive to neutral or alkaline pH systems, Atlantic Kleen Citrus allows cleaning to function far beyond normal cleaning capacity due to increased detergency and solvency levels. Atlantic Kleen Citrus also allows for easy ratio adjustments as the soil load varies. In addition, Atlantic Kleen Citrus reduces the need for excessive washer fuel consumption, as it cleans at a much lower temperature then alkaline-only cleaners.
Kleen 836LF
Atlantic Kleen 836LF is a blend of strong alkaline builders, particle soil dispersants, water conditioners, and a synergistic blend of detergents designed to provide effective penetration and removal of even the most stubborn oils, fats, and soils. Atlantic Kleen 836LF penetrates, lifts, and emulsifies heavy oils and fats from tote bins and dunnage, along with burnt-on soils from ovens, griddles, and fryers. Atlantic Kleen 836LF is suitable for low-foam cleaning of smokehouses, general equipment, and many other applications in food, meat, and poultry plants. Atlantic Kleen 836LF being highly alkaline is not recommended for use on soft metal components such as aluminum or galvanized. Atlantic Kleen 836LF will not adulterate food in federally inspected meat, poultry, and egg processing operations when followed by a potable water rinse. The liquid form of Atlantic Kleen 836LF provides both convenience of handling and improves employee safety.
Kleen IL-10M
Atlantic Kleen IL-10M is a highly effective blend of biodegradable detergents, tarnish and corrosion inhibitors, and water conditioners designed primarily for hard surface cleaning operations, ranging from floors to walls, equipment, and machinery. Atlantic Kleen IL-10M may be applied manually, with non-recirculating high-pressure spray, foam generation, or by floor scrubbing machine. Atlantic Kleen IL-10M is a concentrated liquid that is effective in the hardest of waters. Atlantic Kleen IL-10M’s power-packed detergency emulsifies, saponifies, and effectively disperses even the most difficult of oils and soils, and is easily rinsed away. Atlantic Kleen IL-10M will not adulterate food in federally inspected meat, poultry, and egg processing operations when followed by a potable water rinse. Atlantic Kleen IL-10M is caustic-free and completely defoamed above a temperature of 120°F (and low foaming below).
Kleen A180
Atlantic Kleen A180 is formulated as an excellent cleaner and emulsifier for greasy, oily soils on any hard surfaces not affected by water. Atlantic Kleen A180 is effective in both hard and soft water, is completely free of rinsing, and is solvent and chelant-free for strict environmental compliance and waste treatability. Atlantic Kleen A180 is easily waste treated with simple alum, hydroxide, and/or flocculant chemistries.
Kleen A179
ATLANTIC KLEEN A179 is a concentrated, non-ammonia-based, heavy-duty water-based multipurpose alkaline liquid cleaner. This product quickly penetrates and removes oil, dirt, and greasy soils from all surfaces. ATLANTIC KLEEN A179 may be used to strip old layers of floor finishes, sealers, and uncured paint trackings when used at high concentrations. ATLANTIC KLEEN A179 has been found to be one of the best universal floor cleaners available for automatic floor scrubbing machines.
Kleen 138
Mildly alkaline D’Limonene based powdered detergent. Multiple uses for floors and all metals.
Kleen MC
Atlantic Kleen MC is a concentrated, liquid, multipurpose cleaner containing concentrated wetting agents to give fast penetrating action on moderate to heavy soils. Atlantic Kleen MC does not contain free alkali, phenolics, petroleum derivatives, or organic solvents. This product is formulated with rust and corrosion inhibitors to protect the newly cleaned metal from flash rust. Atlantic Kleen MC is also completely safe in proper concentrations for use on soft metals such as aluminum, brass, and bronze. This product has hundreds of cleaning applications in the transportation, food and beverage, and industrial/institutional sectors. Atlantic Kleen MC was developed to replace national advertised general-purpose cleaners such as ‘GP-Extra’ from Ondeo Nalco, ‘Stock 291’ from Calgon, and ‘220 NP’ or ‘101’ from Oakite, at a more ‘user-friendly’ cost.
Kleen A181
Atlantic Kleen A181 is a universal aqueous degreaser. A highly effective cleaner that has application in industrial and commercial facilities for manual and spray cleaning of floors, walls, and equipment. Atlantic Kleen A181 is a superior cleaner for spray-and-wipe applications.
Kleen IL-04M
Atlantic Kleen IL-04M is a multi-purpose, multi-surface ready-to-use cleaner designed for almost all surfaces, excluding glass and mirrors. Atlantic Kleen IL-04M contains mild alkaline builders, water conditioners, and biodegradable detergents that emulsify, saponify, and effectively disperse even the most difficult of soils. Atlantic Kleen IL-04M removes many stains even on fabric and carpets. (Always spot test when in doubt.) Removes stubborn soils, smoke film, grease, oil, floor wax, nicotine film, lipstick, fingerprints, carbon stains, adhesives, and road film. Works well on whitewall tires, painted woodwork, ceramic tile, exhaust fans, office machines, and most all interior and exterior surfaces. Contains no chlorides or phosphates. Similar to household Fantastic™.
Kleen 396
Atlantic Kleen 396 is a highly concentrated blend of water conditioners, alkaline builders, and biodegradable detergents. Atlantic Kleen 396 offers excellent particle soil removal, high oil tolerance, and provides convenience and economy as a liquid cleaner. It is suitable for automatic chemical feeding. Atlantic Kleen 396 operates at a lower pH when compared with high-pH cleaners, providing for ease of disposal and improved safety. Atlantic Kleen 396 is designed for use in foam-on or mist-on cleaning of processing equipment, walls, rolls, stacks, and floors in paper mills, restaurants, steel mills, and other industrial and commercial facilities. The detergent-alkali combination easily penetrates and disperses resin and pitch deposits, glue, grease, oil, adhesives, fatty buildup, and particle soils leaving a clean surface after a water rinse. The highly effective product can significantly reduce labor and chemical costs, providing fast and effective cleaning of all hard surfaces not harmed by water or alkali.
Kleen SF
Heavy-duty non-toxic water-free floor and surface cleaner. Designed specifically for sub-zero freezer areas.
Kleen 395
Atlantic Kleen 395 is a highly effective blend of biodegradable detergents, tarnish and corrosion inhibitors, and water conditioners designed primarily for hard surface cleaning operations and rinsing of aluminum surfaces after paint stripping operations. Atlantic Kleen 395 may be applied manually, with non-recirculating high-pressure spray, foam generation, or by immersion. Atlantic Kleen 395 is a highly concentrated liquid that is effective in the hardest of waters. Atlantic Kleen 395’s power-packed detergency emulsifies, saponifies, and effectively disperses even the most difficult of oils and soils and paint flakes and is easily rinsed away. Atlantic Kleen 395 will not adulterate food in federally inspected meat, poultry, and egg processing operations when followed by a potable water rinse.
DeOX PS
Atlantic DeOX PS is a blend of organic and inorganic acids, water-soluble solvents, dispersants, water conditioners, and moderate foaming detergents balanced for maximum penetration and dispersion. Atlantic DeOX PS is designed for use as an acidic soak tank cleaner and can be used for descaling heat exchanger surfaces, rust removal, hard water scale, particle soil removal, mill scale, heat treating scale, or cleaning of stainless-steel equipment. Atlantic DeOX PS may also be used as a pickling step prior to phosphatizing, chromating, or painting. Atlantic DeOX PS, since it contains phosphoric acid, one of the safest and most effective descalers known, and sulfuric, one of the strongest acids, PS will remove tenacious calcium hard water scales, as well as many other soils such as protein deposits and milk stone. Atlantic DeOX PS is free rinsing and offers the convenience of a liquid and safety for both personnel and equipment.
DeOX PCS
Atlantic DeOX PCS is a blend of inorganic acids, dispersants, water conditioners, and low foaming detergents balanced for maximum scale and oil penetration and dispersion. Atlantic DeOX PCS is specifically formulated for use in industrial recirculating spray washers that operate at 80-180oF. Atlantic DeOX PCS contains a blend of phosphoric and citric acids, which are the most effective and safe acid laser scale removers known. Atlantic DeOX PCS is low-foaming except at temperatures below 80°F. At higher concentrations, Atlantic DeOX PCS can be used to remove the metal oxide film on steel, copper, aluminum, and brass. Atlantic DeOX PCS will also safely remove smut produced with laser and plasma cutting operations.
DeOX 310LS
DeOX 1,0,0
Atlantic DeOX 1,0,0 is an extremely safe, neutral pH, corrosion and tarnish remover, and metal brightener based on safe organic technology. Atlantic DeOX 1,0,0 can be used in a recirculating spray, soak immersion, ultrasonic, and spray wand applications. Atlantic DeOX 1,0,0 is designed to remove metal oxides, tarnish, rust, weld smut, oils, lubricants, and laser slag from ferrous metals. Atlantic DeOX 1,0,0 is also used for corrosion removal and dramatic brightening of aluminum, copper, and brass alloys without the use of hazardous acids. The pH of the concentrate is completely neutral: 7.00.
Atlantic Kote 595
Atlantic Kote 595 is a highly concentrated liquid mask wash compound containing film forming agents and water conditioners. Atlantic Kote 595 is designed for applying in industrial recirculating and/or brush coat operations. Atlantic Kote 595 provides a barrier on a clean racking system that allows paint and coatings to temporarily adhere to the coating, while facilitating easy coating removal in subsequent washing operations. Atlantic Kote 595 is chemically very mild and will not attack rack solder areas. After Atlantic Kote 595 is air or heated air dried, it will not run or burn in paint or vacuum metalizing ovens (up to 700°F. Atlantic Kote 595’s liquid form offers excellent employee safety and convenience during tank additions and is completely non-hazardous (as reported on the material safety data sheet).
Atlantic Kote 695VS
Atlantic Kote 695 is a concentrated liquid mask wash compound containing film forming agents and water conditioners. Atlantic Kote 695 is designed for applying in industrial recirculating and/or brush coat operations. Atlantic Kote 695 provides a barrier on a clean racking system that allows paint and coatings to temporarily adhere to the coating, while facilitating easy coating removal in subsequent washing operations. Atlantic Kote 695 is chemically very mild and will not attack rack solder areas. After Atlantic Kote 695 is air or heated air dried, it will not run or burn in paint or vacuum metalizing ovens (up to 700°F). Atlantic Kote 695’s liquid form offers excellent employee safety and convenience during tank additions and is completely non-hazardous (as reported on the material safety data sheet).
Atlantic Defoam 6050
Atlantic Defoam 6050, a concentrated high-performance industrial defoamer, is a 100% active defoamer which provides efficient defoaming with permanent effect in most applications. Atlantic Defoam 6050 is based on highly complex organic defoaming agents that destroy foam on both the systems surface and solution. Atlantic Defoam 6050 is especially effective on detergent/soap produced and sustained foam in non-heated and lightly-heated spray systems and paint booths. Atlantic Defoam 6050 contains no petroleum hydrocarbons, solvents, or VOC’s and will not stain aluminum, yellow, and ferrous metals. Atlantic Defoam 6050 finds application in controlling foam in many areas including, industrial spray washers, cooling towers, paper mill applications, effluent foam control, and paint booth treatments. Atlantic Defoam 6050, being a stable liquid, is highly suited for automatic chemical dispensing where applicable. Atlantic Defoam 6050 is highly effective and economical by eliminating the need to slugfeed defoamer and/or rust inhibitors.
Atlantic Floc PK12
Atlantic Floc PK12 completely organic paint detackifier and flocculant for industrial mask washer. Atlantic Floc PK12 is a metal-free, liquid cationic polymer used to detackify and flocculate water based paint particles trapped in industrial mask washer. It is a unique all-organic material that will prevent high solids paint particle build-up within the system. Atlantic Floc PK12 is designed for use in all types of water based recirculating systems. It performs well under many different operating conditions such as: variations of water quality, spray design configurations, and types of paints and thinners sprayed.
Atlantic Defoam 597D
Atlantic Defoam 597D is a high-performance, water dispersible industrial defoamer. Atlantic Defoam 597D is a 100% active which provides efficient defoaming with permanent effect in most applications. Atlantic Defoam 597D is based on highly complex organic defoaming agents that destroy foam on both the systems surface and solution; it is not based on silicone oil. Atlantic Defoam 597D is especially effective on detergent/soap produced and sustained foam in non-heated and lightly-heated spray systems. Atlantic Defoam 597D contains no petroleum hydrocarbons , solvents, or VOC’s and will not stain aluminum, yellow, and ferrous metals. Atlantic Defoam 597D finds application in controlling foam in many areas including, industrial spray washers, cooling towers, paper mill applications, effluent foam control, and paint booth treatments. Atlantic Defoam 597D, being a stable liquid, is highly suited for automatic chemical dispensing where applicable. Atlantic Defoam 597D is highly effective and economical by eliminating the need to slug-feed defoamer.
Atlantic Stryp M170
Atlantic Stryp M170 is a two-layer hot tank paint remover for all types of industrial paints. Atlantic Stryp M170 strips the difficult to remove lacquers, epoxies, polyurethanes, and modern powder paints. Atlantic Stryp M170 provides extremely long tank life with proper maintenance. In order to extend the useful life of the Atlantic Stryp M170 solution, a perforated metal basket may be constructed to fit the bottom of the tank. As the stripped paint accumulates on the bottom, it may carefully be removed by lifting the metal basket, and allowing the excess strip solution to drain over the tank periodically as required. Pre-testing is always recommended.
Atlantic Stryp ADD4
Atlantic Stryp ADD4 is a liquid designed to accelerate removal of difficult to strip coatings, inks, paints, and adhesives. Atlantic Stryp ADD4 contains strong wetting and emulsifying agents which aid in the quick penetration of acrylic, oleoresinous, lacquer, water based, polyester, or enamel residues. Reaction with various polymers solubilizes or disperses the polymers to make their removal possible. Atlantic Stryp ADD4 is designed to be effective against most residues which must be removed. Since Atlantic Stryp ADD4 is a liquid, it may be metered automatically.
Atlantic Stryp 520-HV
Atlantic Stryp 520HV is a thickened blend of chlorinated solvents and alcohol combined with aliphatic solvents, which provides effective penetration and removal of even the most tenacious of paint finishes including most vinyls, powder paints, acrylics, epoxies, and polyurethanes. Pretesting of the stripping ability on finishes is advisable. Atlantic Stryp 520HV holding tank should be constructed of steel or stainless and have a lid to retard the evaporation of the chlorinated solvents. Atlantic Stryp 520HV quickly penetrates and lifts the paint finish from wood, metal, or cement substrates. Use Atlantic Stryp 520HV only in well-ventilated areas. Atlantic Stryp 520HV is not recommended for use on fiberglass or plastic substrates as the stripper will damage the surface.
Atlantic Stryp IL-200
The Atlantic Stryp IL-200 is a hot alkaline paint stripper, which when used in combination with the Atlantic Stryp ADD4, has proven effective in stripping high solids coatings, powder coatings, and most commercially used organic coatings found in industry. The Atlantic Stryp IL-200 paint stripper is safe on ferrous metals, copper, zinc die cast, galvanized steel and aluminum alloys (with the following exceptions: applications on hot dipped galvanized and 7XXX Series aluminum will be subject to restriction on concentration, temperature and time). The ATLANTIC STRYP paint stripping system will not harm the following plated surfaces: chromium, zinc, nickel, cadmium, tin and copper plating.
Atlantic Stryp 840
Liquid economical high alkaline cleaner and paint stripper. Use at 25-100% BV at a rolling boil.
Atlantic Kleen IP-12F
Atlantic Kleen IP-12F is a blend of strong alkaline builders, dispersant, and biodegradable detergents balanced for maximum soil penetration and dispersion. Atlantic Kleen IP-12F is designed for use in single or multi-stage industrial agitated, spray, immersion and electro- cleaning cleaning systems. Atlantic Kleen IP-12F effectively removes heavy oils, grease, carbon, rust and other surface oxides, paints, particle soils, scale, and general shop soils. Atlantic Kleen IP-12F is capable of cleaning a variety of ferrous metal components such as engine blocks and assemblies, greasy bearings, and transmission parts to name a few. Atlantic Kleen IP-12F is recommended for aluminum ONLY as a heavy-duty etchant prior to chromate conversion coatings and painting. Due to the chemical balance of alkalinity and an effective detergent system, Atlantic Kleen IP-12F provides unique cleaning ability, economy, and prolonged tank life.
Atlantic Stryp 523
Atlantic Stryp 523 is a liquid conformal coating, paint, and adhesive remover specifically formulated for removal of conformal coatings from computer circuit boards and chips. Atlantic Stryp 523 is a safe pH neutral blend of safety solvents, surfactants, and petroleum hydrocarbons which provides effective penetration and removal of paint finishes and conformal coatings, including most acrylics and polyurethane’s. Pretesting of stripping ability on finishes is advisable. Atlantic Stryp 523 exhibits long tank life with extended immersion stripping ability. Atlantic Stryp 523 is a very effective wipe solvent with a high affinity for water and solvent based clear-cote and adhesives. The product safely replaces methylene chloride and other hazardous solvents and strippers.
Atlantic Stryp 755
Atlantic Kleen 755 is a blend of chlorinated solvents, ethers, and alcohol combined with organic acids, which provides effective penetration and removal of even the most tenacious of paint finishes including most vinyls, acrylics, and polyurethanes. Pretesting of stripping ability on finishes is advisable. Atlantic Kleen 755 comes with a water seal which retards evaporation of the chlorinated solvents and reduces the odor level. Atlantic Kleen 755 exhibits long tank life with extended stripping ability. In order to extend the useful life of the Atlantic Kleen 755 solution, a perforated metal basket may be constructed to fit the bottom of the tank. As the stripped paint accumulates on the bottom, it may carefully be removed by lifting the metal basket, and allowing the excess strip solution to drain over the tank periodically as required.
Atlantic Stryp 54T
Atlantic Stryp 54T is a unique two-layered immersion paint stripper formulated to remove urethanes, epoxy, powder coating, e-coating, C.A.R.C, and difficult-to-remove coating systems. Atlantic Stryp 54T does not contain hazardous ingredients such as phenol, creosol, chromate, cresylic acid, or methylene chloride. Atlantic Stryp 54T was formulated to stryp coatings from all ferrous metals and most non-ferrous metals without effect on the metal. Recommended operating temperature for quickest stripping results is 130°F +/- 10°F, but almost all stripping can typically be done at room temperature. Always make sure the oil seal is intact and at a depth of at least 1” when running over a temperature of 120°F to prevent excessive evaporation.
Atlantic Stryp 517
Atlantic Stryp 517 is a blend of methylene chloride, ammonia, and other additives and inhibitors, which provide effective penetration and removal of even the most tenacious paint finish, including powder paint, vinyl, polyurethane, epoxy, and acrylic. Pretesting Atlantic Stryp 517 for effectiveness is strongly recommended. Atlantic Stryp 517 contains a water seal which reduces solvent evaporation significantly. Atlantic Stryp 517 is effective on most metals but is not recommended for fiberglass or plastic components. The useful tank life of Atlantic Stryp 517 may be extended by building a perforated metal basket designed to cover the tank bottom. Periodic removal of the basket by the hoist removes excessive paint residues which have settled on the tank bottom.
Atlantic Stryp 520-LV
Atlantic Stryp 520LV is a water-thin blend of non-flammable solvents and alcohol combined with alaphatic solvents, which provides effective penetration and removal of even the most tenacious of paint finishes including powdercoat, vinyls, acrylics, epoxies, and polyurethanes. Pretesting of the stripping ability on finishes is advisable. Atlantic Stryp 520LV tank should be constructed of steel or stainless and have a lid to retard the evaporation of the chlorinated solvents. Atlantic Stryp 520LV quickly penetrates and lifts the paint finish from all ferrous and non-ferrous metal, wood, or cement substrates. Use Atlantic Stryp 520LV only in well ventilated areas. Atlantic Stryp 520LV is not recommended for use on fiberglass or plastic substrates as the stripper will damage the surface.
Atlantic Stryp 636
Atlantic Stryp 636 is a blend of select alkalis, non-phenolic penetrating agents, dispersant, and water conditioners. Atlantic Stryp 636 is very low in odor and provides effective removal of even the most difficult finishes, such as, urethanes, polyesters, epoxies, and powder coatings. Pretesting of the stripper for effectiveness is recommended. Atlantic Stryp 636’s liquid form offers both safety and convenience during tank additions, as it will be less exothermic than powdered strippers. Atlantic Stryp 636 is also effective in removing many types of inks from floors, utensils, and related printing equipment. Atlantic Stryp 636 exhibits extended tank life, and is very economical when compared to other stripping operations.
Atlantic Stryp nMP-2
Atlantic Stryp nMP-2 is an alkaline liquid multi-metal safe heavy duty paint stripper and cleaner for removing very heavy deposits of liquid and powder paints, e-coat, carbon, oils, and other soils from aluminum, steel, tin-plate, aluminized steel, and other ferrous and non-ferrous metals. Atlantic Stryp nMP-2 is excellent on base coat and primer paints typically found in the transportation re-manufacturing and wheel manufacturing facilities. Atlantic Stryp nMP-2 reduces the reliance on Hazardous Air Pollutants found in most paint and carbon removal operations. Atlantic Stryp nMP-2 is formulated to dissolve and/or ‘lift’ the paints and soils from the metal substrate. Atlantic Stryp nMP-2 can dramatically the time, labor, and expensive typically associated in plastic and media bead blast operations removing tenacious paint and residual carbon and oils. Atlantic Stryp nMP-2 is formulated to QUICKLY remove urethanes, epoxy, powder coating, and most other difficult-to-remove coating systems; in most cases 20 to 30-minutes @ 170°F.
Atlantic Stryp GR
Atlantic Stryp GR is a single phase water-based non-methylene chloride paint, ink, and coating remover. Atlantic Stryp GR was specifically formulated for the removal of epoxies and polyurethane top coats, polydisulfide primers, and today’s new difficult to remove powder coatings. Pretesting of stripping ability on finishes is always advised.Use as received. Can be heated to 150°F maximum to decrease stripping time. Use with alkaline and solvent resistant tank and equipment.
Atlantic Stryp 654HD
Atlantic Stryp 654HD is a unique environmentally sensitive immersion paint stripper formulated to remove urethanes, epoxy, powder coating, e-coating, C.A.R.C, and difficult-to-remove coating systems. Atlantic Stryp 654HD does not contain hazardous ingredients such as phenol, creosol, chromate, cresylic acid, or methylene chloride. Atlantic Stryp 654HD was formulated to stryp coatings from all ferrous metals and most non-ferrous metal without effect on the metal. Recommended operating temperature for quickest stripping results is 120°F to 140°F, but most stripping can typically be done at room temperature.
Atlantic Stryp 760HD
Powdered, Heavy-Duty
Atlantic Stryp 760HD is a powdered alkaline spray cleaner and coating remover of select alkali’s, non-phenolic penetrating agents, anti-scale agents, dispersant, and wetting agents. Atlantic Stryp 760HD is low in odor and provides rapid penetration and emulsification of even the most difficult greases, such as, urethanes, pipe dope, epoxies, waxes, and even powder coated paint. Atlantic Stryp 760HD is also effective in removing many types of inks, pigments, particulate, and light scale around heat exchange areas. Atlantic Stryp 760HD exhibits extended tank life and is economical. Atlantic Stryp 760HD is suitable for use in industrial spray hot alkaline grease stripping operations. Atlantic Stryp 760HD is unique in its soil penetration ability due to a special combination of solvents absorbed into the product which loosens even resinous and oxidized greases and oils. If the solution can contact surfaces, the soils and build-up can be removed. Laboratory pre-testing of the stripper for effectiveness is typically recommended prior to start-up. Atlantic Stryp 760K is safe to use on ferrous metals only.
Atlantic Stryp 655T
Acid Activated Thin Cold Solvent Paint Stripper
Atlantic Stryp 655T is a acid activated cold solvent paint stripper. It is a thin blend of chlorinated solvents, ethers, and alcohols combined with organic acids, which provides effective penetration and removal of even the most tenacious of paint finishes including CARC, most vinyls, powdercoat, acrylics, and polyurethanes. Pretesting of stripping ability on finishes is advisable. Atlantic Stryp 655T is applied undiluted in an immersion tank. It quickly penetrates and wrinkles the finish to allow easy removal. A pressure water rinse is recommended. DO NOT DILUTE Atlantic Stryp 655T with other solvents, or excessive amounts of water. NO HEATING of the solution is desired or necessary. Proper protective equipment must be worn while applying Atlantic Stryp 655T. Please review SDS for complete handling, safety, and environmental information. (2019: The US government as limited sale and use of this item to ‘industrial use only’).
Atlantic Stryp 655HV
Acidic thickened methylene chloride multi-layer paint stripper. Economical and fast-acting. One of the most effective strippers of military CARC and e-coat paint known. No phenol. Industrial Use Only.
Atlantic Stryp 54T
Non-Methylene Chloride Immersion Paint Stripper (Ambient to 140°F)
Atlantic Stryp 54T is a unique two layered immersion paint stripper formulated to remove urethanes, epoxy, powder coating, e-coating, C.A.R.C, and difficult-to-remove coating systems. Atlantic Stryp 54T does not contain hazardous ingredients such as phenol, creosol, chromate, cresylic acid, or methylene chloride. Atlantic Stryp 54T was formulated to stryp coatings from all ferrous metals and most non-ferrous metal without effect on the metal. Recommended operating temperature for quickest stripping results is 130°F +/- 10°F, but almost all stripping can typically be done at room temperature. Always make sure the oil seal is intact and at a depth of at least 1” when running over a temperature of 120°F to prevent excessive evaporation.
Atlantic Stryp 520LV
Neutral pH methylene chloride stripper for wood and metal. Water thin for in-tank use. Industrial Use Only.
Atlantic Stryp 520HV
Neutral pH methylene chloride stripper for wood and metal. Thickened for vertical industrial surfaces. Industrial Use Only.
Atlantic Stryp 633HD
Alkaline Co-Solvent Paint Stripper, Cleaner, In-Line Paint Remover
Atlantic Stryp 633HD is a blend of select alkalis, non-phenolic penetrating agents, surfactants, dispersants, and water conditioners. Atlantic Stryp 633HD is very low in odor and provides quick and effective removal of even the most difficult finishes, such as, urethanes, polyesters, epoxies, and powder coatings. Pretesting of the stripper for effectiveness is recommended. Atlantic Stryp 633HD’s liquid form offers both safety and convenience during tank additions, as it will be less exothermic than powdered strippers. Atlantic Stryp 633HD is also effective in removing many types of inks from utensils and related printing equipment. Atlantic Stryp 633HD exhibits extended tank life, is very economical (when compared to other immersion stripping operations), and is one of the only products on the market to effectively balance caustics, wetters, and co-solvents in the same stable concentrate. The addition of the biodegradable co-solvents and wetters allows for effective stripping and cleaning in less time, lower temperature, or both.
Atlantic Stryp 639
Defoaming, Recirculating Spray, Warm-Alkaline Paint Remover and Cleaner for Aluminum and Steel Substrates
Atlantic Stryp 639 is a blend of select alkalis, non-phenolic penetrating agents, dispersants, surfactants, and water conditioners. Atlantic Stryp 639 is very low in odor and provides effective removal of even the most difficult finishes, such as, urethanes, polyesters, epoxies, and powder coatings on aluminum and ferrous metal substrates. Atlantic Stryp 639 is specifically formulated for use in automotive and equipment remanufacturing operations were greases, oil, and paints need to be removed. Atlantic Stryp 639’s liquid form offers both safety and convenience during tank additions, as it will be less exothermic than powdered strippers. Atlantic Stryp 639 is also effective in removing many types of inks and coatings from floors, utensils, and related printing equipment. Atlantic Stryp 639 exhibits extended tank life, and is very economical when compared to other stripping and cleaning operations.
Atlantic Kleen 005DA
Specialty Enzymatic Detergent for Dissolving Industrial Starch Adhesives
Atlantic Kleen 005DA is a concentrated blend of enzymes, corrosion inhibitors, biodegradable detergents, and specialty additives designed for use as a specialty detergent within the paper and corrugating industries. Atlantic Kleen 005DA was specifically formulated to solublize and dissolve wet, tacky, and fully dried corn and wheat starch on glue/adhesive rolls, glue pans, metering rolls, and corrugating rolls found within single facer, double backer, and double glue units. Atlantic Kleen 005DA can be applied by immersion, ultrasonic immersion, foam-on, brush-on, spray-on, and low-pressure recirculated wash and rinse. There is no odor or contamination problems using Atlantic Kleen 005DA when followed by a fresh water rinse. Soak cleaning with Atlantic Kleen 005DA significantly reduces both labor costs and plant down-time, and is economical to use when compared to manual removal of dried adhesive residue.