Metalforming

Atlantic’s broad range of metal-forming fluids can be utilized in various drawing, stamping, and perforating applications. ASCC’s metal forming fluids provide lubrication and in-process rust prevention as metal is drawn to produce sheet metal drawing or wire, bar, and tube drawing. Product properties can include an easy-to-remove lubricating film, fast evaporating lubricants, extended tool and die life, and excellent bio and emulsion stability for desired metal forming.

Draw 2750-VB

Atlantic Draw 2750-VB is a fully-synthetic, chlorinated drawing compound formulated for medium to heavy-duty drawing and stamping operations. Atlantic Draw 2750-VB contains amide soap based inhibitors to deter the formation of corrosion on the finished parts and machinery.

Draw SYN4 

Atlantic Draw SYN4 is a fully-synthetic, non-chlorinated drawing compound formulated for extra heavy duty extreme pressure forming operations. It provides outstanding film strength for extended die life, excellent surface finish and corrosion protection. In addition, its inherent stability resists microbial degradation. Atlantic Draw SYN4 provides a clean work environment for maximum operator acceptance during the life of the fluid. EP (extreme pressure) lubrication such as this is rare in a true synthetic, nitrite-free metalforming lubricant. Post-process advantages include excellent weld through characteristics and cleanability. Atlantic Draw SYN4 contains inhibitors to deter the formation of corrosion on the finished parts. Atlantic Draw SYN4 was developed to replace nationally advertised lubricants such as Ondeo Nalco Cal-Lube 1472 at a more user friendly cost.

Draw SYN2 

Atlantic Draw SYN2 is a fully-synthetic, non-chlorinated drawing compound formulated for medium-duty drawing and stamping operations. It provides outstanding film strength for extended die life, excellent surface finish and corrosion protection on ferrous metals. In addition, its inherent stability resists microbial degradation. Atlantic Draw SYN2 provides a clean work environment for maximum operator acceptance during the life of the fluid. Extreme pressure boundary lubrication such as this is rare in a free-flowing true synthetic, nitrite-free metalforming lubricant. Post-process advantages include excellent weld through characteristics and cleanability. Atlantic Draw SYN2 contains amide soap based inhibitors to deter the formation of corrosion on the finished parts and machinery.

Draw 190 

Atlantic Draw 190 is an emulsifiable, metal-forming lubricant developed for general purpose and heavy-duty applications.  This product provides superior bacterial resistance during the life of the fluid for long-term, trouble-free performance.  Due to the product’s inherent stability, optimum performance characteristics are maintained for the life of the fluid without the need for periodic additions of costly additives.  Atlantic Draw 190 contains highly polar ingredients and EP (extreme pressure) additives that provide superior lubricity and boundary lubrication.  In addition, the in-service cleanliness of this product prevents the formation of heavy, tacky water insoluble residues.  The versatility of this product makes it ideal for plants where intermittent service demands superior performance.

Draw 192 

Atlantic Draw 192 is an emulsifiable, metal-forming lubricant fluid developed for both general purpose and heavy‑duty applications.  This product provides superior bacterial resistance during the life of the fluid for long-term, trouble-free performance. Due to the product’s inherent stability, optimum performance characteristics are maintained for the life of the fluid without the need for periodic additions of costly additives. Atlantic Draw 192 contains highly polar ingredients and a blend of EP (extreme pressure) additives that provide superior lubricity and boundary lubrication.  In addition, the in-service cleanliness of this product prevents the formation of heavy, tacky water insoluble residues.  The versatility of this product makes it ideal for plants where intermittent service demands superior performance.  Atlantic Draw 192 was developed to economically replace nationally marketed drawing compounds from Houghton, Fuchs, Castrol, and Nalco.

Draw SYN10-70

Atlantic Draw SYN10-70 is a fully-synthetic, non-chlorinated drawing compound formulated for medium-duty drawing and stamping operations.  It provides outstanding film strength for extended die life, excellent surface finish, and corrosion protection on ferrous metals.  In addition, its inherent stability resists microbial degradation.  Atlantic Draw SYN10-70 provides a clean work environment for maximum operator acceptance during the life of the fluid.  Extreme pressure boundary lubrication such as this is rare in a free-flowing true synthetic, nitrite-free metal forming lubricant.  Post-process advantages include excellent weld-through characteristics and complete cleanability.

Draw 194 

Heavy-duty water dilutable deep drawing and stamping compound. Contains both chlorine and sulfur compounds for the most difficult operations.

Draw 241 

Light to medium duty straight stamping and drawing oil. Completely water displacing.

Draw 410 

Atlantic Draw 410 is an oil based drawing and stamping lubricant designed for maximum performance under extreme heat and pressure. This product leaves a minimal film which provides a cleaner environment than pigmented compounds around press areas. This oil based product contains chlorine extreme pressure agents and fatty esters. Atlantic Draw 410 is well suited for deep drawing gas tanks and similar shapes. Atlantic Draw 410 will also work well in light duty operations due to the lower viscosity and sulfur-free composition.

Draw 7735 

Heavy duty drawing and stamping fluid. Contains chlorine extreme pressure additives.

Draw 547LF

Chlorinated heavy-duty drawing and stamping fluid. High load-carrying capacity for deep drawing operations. Excellent for severe operations on heavy-gauge steel. Contains a high level of wetters and surfactants to improve the oils ability to be cleaned from the metal after use.

Draw 420 

Heavy duty medium viscosity stamping and drawing fluid. Both ferrous and non-ferrous metals.

Draw 547A

Atlantic Draw 547A is a chlorinated, heavy-duty oil based drawing and stamping lubricant. This product contains chlorine extreme pressure agents and is lighter in density then water. Atlantic Draw 547A drawing compound is a non-pigmented oil based lubricant used on steel, stainless steel, aluminum, and copper during deep drawing, forming, stamping, punching, blanking, swaging, and tube drawing operations. The high load-carrying capacity of the lubricating film permits heavy-duty deep drawing without gouging or tearing. Atlantic Draw 547A also leaves steel work surfaces protected with a rust inhibiting film.
Draw 2750-V
Atlantic Draw 2750-V is a fully-synthetic, chlorinated drawing compound formulated for medium to heavy-duty drawing and stamping operations. It provides outstanding film strength for extended die life, excellent surface finish and corrosion protection on ferrous metals. In addition, its inherent stability resists microbial degradation. Atlantic Draw 2750-V provides a clean work environment for maximum operator acceptance during the life of the fluid. Extreme pressure boundary lubrication such as this is rare in a free-flowing true synthetic, nitrite-free metalforming lubricant. Post-process advantages include excellent weld through characteristics and complete cleanability. Atlantic Draw 2750-V contains amide soap based inhibitors to deter the formation of corrosion on the finished parts and machinery.

Draw MP 

Atlantic Draw MP is an effective light to moderate duty odorless evaporative drawing compound designed to be applied manually, with automated addition equipment, or in tank operations. Atlantic Draw MP greatly reduces the risk to personnel because it does not contain any of the extremely hazardous chlorinated chemicals. Atlantic Draw MP evaporates completely and does not leave a residue on the parts after evaporation, so parts can be painted.  Atlantic Draw MP is an extremely effective replacement for acetone, MEK, alcohol, and other extremely flammable solvents, as well as drawing, lubes that must first be cleaned before they can be painted.

Draw MP2 

Low cost medium duty vanishing oil. Contains EP additives for all metals.

Draw 077 

Industrial drawing and fin stamping vanishing lubricant. Evaporates in 7-10 minutes.

Draw 1150T 

Atlantic Draw 1150T is a light duty to medium duty evaporative near-odorless stamping and drawing lubricant designed to be applied manually, with automated lubricant equipment, or in tank pre-dip operations. Atlantic Draw 1150T greatly reduces the risk to personnel because it does not contain any extremely hazardous chlorinated chemicals. Atlantic Draw 1150T evaporates and leaves a nearly imperceptible inhibitor film on the parts after evaporation.

Draw 142

Atlantic Draw 142 is a light duty to medium duty general purpose fully-evaporative odorless stamping and drawing lubricant designed to be applied manually, with automated lubricant equipment, or in tank pre-dip operations. Atlantic Draw 142 greatly reduces the risk to personnel because it does not contain any extremely hazardous chlorinated chemicals. Atlantic Draw 142 evaporates completely and does not leave a residue on the parts after evaporation.
Draw 1190XRP
Atlantic Draw 1190XRP is a medium to heavy-duty evaporative low-odor stamping and drawing lubricant designed to be applied manually, with automated lubricant equipment, or in tank pre-dip operations. Atlantic Draw 1190XRP greatly reduces the risk to personnel because it does not contain any extremely hazardous chlorinated chemicals. Atlantic Draw 1190XRP evaporates and leaves a nearly imperceptible inhibitor film on the parts after evaporation. Atlantic Draw 1190XRP contains extreme pressure additives to allow for deeper draws and improved stamping.

Cool CARBIDE 

Specialty straight oils and synthetics. Formulated specifically for carbide grinding and machining.

Cool HONE(s) 

Premium grade all metal finishing honing lubricants. Varied viscosities based.

Cool MICRO(s) 

Family of synthetic micro and mist-lubricants to cut, saw, form, and stamp multi-metals without water. Zero coolant disposal.

Biocides and Fungicides 

Full line of (10) EPA approved biocides specifically formulated for metalworking operations.

Cool TAP(s) 

All purpose tapping fluids for hand tapping and threading. All ferrous and non-ferrous metals.

Cool ADD(s) 

Specialty additives including biocides, odor control agents, defoamers, stabilizers, lube adds, inhibitors, and dispersants.